Dispersion Custom made in China replacement parts in Akure Nigeria Rubber Kneader Machine Internal Mixer with top quality

Dispersion Custom made in China  replacement parts  in Akure Nigeria Rubber Kneader Machine  Internal Mixer with top quality

We – EPG Group the largest gearbox & motors , couplings and gears manufacturing facility in China with 5 distinct branches. For more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Dispersion Rubber Kneader Device / Inner Mixer 

one . Company INFORMATION 

1-1 OULI Company

Proven in 1997 , HangZhou Ouli equipment CO., LTD was found in Xihu (West Lake) Dis. District, the west coastline of HangZhou town,ZheJiang province ,China.

Branches in HangZhou , HangZhou etc had been produced in 2012 and 2015 .

We are specialized in rubber equipment creating,producing and maintenance works  

OULI main merchandise:
Rubber mixing tools / Rubber vulcanizing machine / Automatic and semi-automatic waste tire recycling products / Rubber calendaring machine / Rubber extruding tools / Reclaimed rubber manufacturing line

Our equipment have been exported to a lot more than 20 countries this sort of as The united states, Canada, Australia, Southeast Asia, Center East,Brazil .

We warmly welcome clients visit  manufacturing facility and engineering discussion is very appreciated .

one-2 OULI workshop 




2-1. Standard introduction for Dispersion Rubber Kneader Equipment / Interior Mixer.  

Rubber vulcanizing press applies to all varieties of rubber (natural rubber, EPDM rubber, NBR rubber, artificial rubber, silicone rubber ext. )  vulcanizing and compression molding.

rubber vulcanizing press can be employed to make O ring, sealing areas, oil seal, car elements, rubber crash pad, rubber air spring, key board, health-related rubber components, rubber bottle stopper, silicone wrist band, h2o-end tape, bridge assistance/bridge bearings, rubber cable, electronics insulators etc..  

two-2. Features 


FOR More Details : WWW.OULI-Equipment.COM

two-3. Parameter of Dispersion Rubber Kneader Machine / Internal Mixer.


Parameter/model X(S)N-three X(S)N-20 X(S)N-35 X(S)N-55 X(S)N-seventy five X(S)N-one hundred ten
Whole volume (L) eight forty five eighty 125 175 250
Wor ept volume (L) three 20 35 55 seventy five 110
Motor energy (KW) 7.five 37 fifty five seventy five 110 185
Tilting motor power (KW) .55 one.5 two.2 two.two four. seven.five
Tilting angle (°) one hundred forty a hundred and forty one hundred forty a hundred and forty 140 a hundred and forty
Rotor pace (r/min) 32/25 32/26.5 32/24.5 32/26 32/26 thirty/24.five
Force of compressed air (MPa) .7-.9 .6-.8 .6-.eight .6-.eight .6-.eight .6-.8
Potential of compressed air (m3/min) ≥0.three ≥0.seven ≥0.nine ≥1. ≥1.3 ≥1.six
Pressure of cooling water (MPa) .2-.four .2-.four .3-.4 .3-.4 .3-.4 .3-.4
Excess weight (kg) 1038 4437 6500 7850 15710 14200


2-4. Configuration for Dispersion Rubber Kneader Device / Inner Mixer. 

Mixing chamber:

It is made up of a “W” condition physique and two facet boards produced of high quality steel plates by implies of extrusion forming and welding, which are jacked to consider the flow of cooling h2o or steam. It is plated with tough chrome on its inner partitions.

Thermal Resistance:

There is a plug-in thermal resistance in middle segment of the bottom of the chamber to be connected to electrical method to examine and screen the temperate.


It is created to the hollow blades of Banbury variety. The hollows are linked with axial gap of rotor shaft utilized as cooling or heating passage. The leading edges of blades and the conclude faces of ~ rotor shaft are surface welded with cobalt-base hard alloy and grinding, then plating with hard chrome and sprucing.

Cooling/heating system 

A widespread piping technique is adopted for either cooling or heating content in mixing operation. Through the program cooling water or steam is fed in 3 methods to the cavities of the rotors blades, the mixing chamber and the leading ram.

Tilting system: 

It is made up of a rotor with brake, cycloidal equipment reducer, TP variety worm and worm gear, and so on…It is ready to actuate the mixing chamber tilting by 140° Close to the front rotors.

Dust sealing device:

At the joint among the top of the mixing chamber and the cantilevered arm of the device body, the dust sealing assemblies with curved slotted partings are utilized acquiring an superb and dependable sealing objective.
The end face of the rotor is sealed by conclude contact sealing with nor oil-lubrication and is seals effectively and is put on-resistant and sturdy.

Principal driving method:

The element is created up with principal motor, reducer, connecting gears. It realizes odd-velocity rotation of the rotors with managing encounter one other.

Pneumatic manage method:

Pneumatic management program is managed by XG buy. The bi-directional air cylinder helps make the ram up or down. In case the over load takes place in the mixing chamber, the leading ram can be lifted routinely or manually if needed, so as to defend motor from overload.

Electric control system:

Imported PLC device and electric management parts which are all imported goods or imported engineering goods are adopted in the electric powered management system as to raise control trustworthiness.

two-5. Sample pictures  for Dispersion Rubber Kneader Device / Inside Mixer. 

3. Consumer FEEDBACK 


five. Bundle AND Supply

six. FAQ

Q1:Why pick Us?

1.More than twenty a long time background of OULI Machine manufacturing unit.

6-8 several years international sales knowledge employees, more performance and expert.

Engineers ove ept provider much more than twenty nations around the world .

2.ISO:9001,CE,BV certification acceptance

three.Service timely, Guarantee to give solution in 12 several hours,Promise consumer problems free of charge.

4.Short supply day, No delay. Acknowledge urgent buy for prompt cargo.

Q2:What about shipping day?

It will be in accordance to the amount of devices. Typically devices will be shipment within 20-thirty days right after get deposit, No delay.

Take urgent order for prompt cargo.

Q3:What’s the warranty statement? 

OULI Equipment warrants all the products manufactured by OULI MACHINE to free from defects in material and workmanship Under normal use of a period of 12 months or 36months after the date of the original purchase price if repair or alternative is not possible of practical, OULI Machine warranty covers ONLY the product itself. 

OULI MACHINE will assume no liability for labor costs, installation costs, or other losses. 

Your warranty rights will be honored

Only when the product has been installed and used properly as deemed by OULI Equipment,OULIMACHINE will not repair products damaged by improper use or faulty installation.

Q4:What about OULI ove ept services ?

OULI will arrange ove ept setting up and training operates if customer require .

Client need to pay for accommodation , tickets and income .

Meanwhile OULI has branches in different locations like north The usa , Southeast Asia , Brazil and many others , etc .

Dispersion Rubber Kneader Device / Interior Mixer 


The use of original tools manufacturer’s (OEM) element figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our firm and the listed replacement components contained herein are not sponsored, accredited, or manufactured by the OEM.

Dispersion Custom made in China  replacement parts  in Akure Nigeria Rubber Kneader Machine  Internal Mixer with top quality

Dispersion Custom made in China  replacement parts  in Akure Nigeria Rubber Kneader Machine  Internal Mixer with top quality